Philips DVDR80 Operating Instructions Manual page 8

The following messages may appear in your DVD recorder display
The DVD recorder is in initial installation mode. Switch the TV on, then
read the paragraph on 'Initial installation' in 'Installing your DVD
recorder'.
No input signal available (signal inadequate or unstable)
The menu on the screen is active
Disc tray opening
Disc tray open
Disc tray closing
Disc being read
Once recording has been successfully completed the table of contents is
created.
The menu structure is created after the first recording has been made
on a new disc
You received a copy-protected signal. This may come from a
copy-protected DVD/videotape of a DVD/video player or from a TV
channel.
Please wait until this message disappears. The DVD recorder is busy
performing a task.
A disc has not been inserted for recording. If a disc has been inserted, it
cannot be read.
Information about the inserted DVD is displayed on the screen
The DVD recorder is processing the changes to make them DVD
compatible
The entire disc is erased
The disc inserted is either new or has been completely erased (no
recordings).
The disc is protected against recording.
The maximum number of titles per disc has been reached. The
maximum number of titles on a disc is 48.
The maximum number of chapters within a title/or the disc has been
reached. The maximum number of chapters within a title is 99, on a disc
124.
The disc is full. There is no space for new recordings