Philips DVDR80 Operating Instructions Manual page 55

The GUIDE Plus+® System
If GUIDE Plus+ ® information has been loaded, function buttons (colour fields) at the top of the
screen indicate that you can perform various actions in the GUIDE Plus+
Green ( ANGLE ), Yellow ( SUBTITLE ), Blue ( AUDIO ) whose function depends on the
respective menu. Always check the function (description) in the corresponding colour field before
pressing a button.
If no colour buttons are displayed, pressing them will have no effect.
An t button is also available. If additional information is available (symbol i on the screen), you can
use this button to retrieve the information.
This list appears when you press the GUIDE/TV button. You can view the current listing for all
the TV channels from today to the same day next week.
If data from the GUIDE Plus+
allocation of programme numbers to the channels in the '
Read therefore the section 'The '
If the TV-channel that transmits the GUIDE Plus+
number, no further GUIDE Plus+
1
Press GUIDE/TV . The '
a
b Either the aerial is not connected or GUIDE Plus+
available. The DVD recorder needs some time to collect this data. Leave it
switched off during this process ( STANDBY m button). Do not disconnect
the DVD recorder from the mains!
b If you have connected an external receiver (satellite receiver, set-top box,
cable TV box,...), it must be switched on.
a
b Please check your correct channel line up in the '
Read therefore the section The '
2
Select the TV channel you require with P+ A or P- B . You can
use the number buttons 0..9 to select a TV channel directly.
You can use the O and N buttons to scroll a page at a time.
1
Press the yellow function button.
2
An overview of all TV channels appears.
3
Select the TV channel you want using C , D , P- B , P+ A .
4
Confirm with OK .
3
Use the D or C button to select the show you want. You can hold
down D or C to browse faster through the start times.
If you hold the button N or O pressed, you can switch forward
or back one day.
® system is already available after the initial installation, check the
' screen'.
® data was allocated to the wrong programme
® data can be loaded.
' screen will appear.
' screen.
® screen. (Red ( ZOOM ),
' screen.
®
data is not yet
' screen.