Philips DVDR80 Operating Instructions Manual page 59

The GUIDE Plus+® System
This screen can be divided in subcategories. These depend on the information provided by the
GUIDE Plus+ ® system. If there are no categories available, no data has been provided yet. Try
visiting this page later.
1
Press P- B .
Select the corresponding subcategorywith P- B , P+ A .
2
Select from the displayed data with P- B or P+ A .
3
Confirm using OK to receive more information.
4
Return to the '
(' ').
Here you can allocate the programme numbers to the corresponding TV channels and switch
them on/off for the programme listings ('
TV channels on the external receiver.
1
Press P- B .
2
Select the TV channel you want to change using P- B , P+ A . Use
the D and C buttons to switch between tiles.
This tile contains the TV channels with their short descriptions and indicates whether the TV
channel is displayed in the programme listing ('
You can switch on/off a TV channel for the '
This tile contains the TV channel properties and the programme numbers. You can modify
channel allocation or assign an external receiver. In order to assign a receiver, it must be already
installed in the GUIDE Plus+ ®
To change allocations, proceed as follows:
1
Select the TV channel you want to change using P- B , P+ A .
2
Press the green function button.
3
Enter the programme number of the TV channel using the number
buttons 0..9 . You can only enter programme numbers of TV
channels that have already been installed.
' screen by pressing the red function button
' screen). Moreover, you can define the use of the
' screen) or not.
' screen using the red function buttonn
system.