Philips DVDR80 Operating Instructions Manual page 36

Some TV channels send coded TV signals that can only be viewed properly with a purchased or
rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The
following function automatically activates the connected decoder for the TV channel you want to
watch.
If your TV set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV
set). Settings cannot then be made in this menu.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY-ON m .
3
Use the P+ A and P- B buttons or the number buttons 0..9 on
the remote control to select the TV channel for which you want to
use the decoder. If necessary, use the MONITOR button to switch to
the internal tuner.
4
Press the SYSTEM-MENU button on the remote control. The menu
bar appears.
5
' symbol with D or C .
Select '
6
' using P- B or P+ A and confirm with C .
Select '
7
Select '
8
' using P- B or P+ A .
Select '
9
' with D or C .
Select '
Use C to select '
' in the '
0
Confirm with OK .
A
To end, press SYSTEM-MENU .
Your decoder has now been allocated to this TV channel.
' using P- B or P+ A and confirm with C .
' line on the screen (Decoder off).
Installing your DVD recorder