Garmin nüvi 4592LM Quick Start Manual page 19

1.4 Installing your nüvi
WARNING
Your nüvi unit comes with a built-in lithium battery. To prevent potential damage to the
product or injuries due to direct exposure sunlight, be sure to remove the unit from the
mount or keep the unit away from direct sunlight when the unit is not in use.
Before you use your device on battery power, you should charge it.
1. Plug the vehicle power cable ➊ into the USB port on the device.
2. Press the mount ➋ onto the suction cup ➌ until it snaps into place.
3. Press the suction cup to the windshield, and flip the lever ➍ back toward the
windshield.
4. Fit the tab on the top of the mount into the slot on the back of the device.
5. Press the bottom of the magnetic mount into the device until it clicks.
6. Plug the other end of the vehicle power cable into a power outlet in your vehicle.
➌
➍
➊
➋
18 nüvi 4592LM Quick Start Manual