Page 2
Warning See the Important Safety and Product Information guide in the product box for product warnings and other important information. Oregon units operate on two AA batteries. Use alkaline, NiMH, or lithium batteries. Use precharged NiMH or lithium batteries for best results.
Page 3
1. Press and quickly release 2. Touch Lock Screen Screen). Oregon Series Quick Start Manual To acquire gPS satellite signals: 1. Go outdoors to an open area, away from tall buildings and trees. 2. Turn on the Oregon. Acquiring satellite signals can take a few minutes.
Page 4
To open the Compass page: Touch Compass. The bearing pointer points to your destination, regardless of the direction you are moving. If the bearing pointer points toward the top of the compass, you are traveling directly toward your destination. If it points any other direction, turn toward that direction until the arrow is pointing toward the top of the...
To review information about a point on the map: 1. Touch the location you want to review. 2. Touch the information button at the top of the screen. To mark your current location as a waypoint: 1. Touch Mark Waypoint. 2.
Page 6
To navigate to a destination using Where To?: Use the Where To? page to navigate to your saved waypoints, enter coordinates, find points of interest, and more. 1. Touch Where To?. 2. Touch a category. 3. Touch the item to which you want to navigate.
Page 7
To clear your current track: Setup reset Touch > Current Track > Yes. Visit www.garmin.com documentation and information. Oregon Series Quick Start Manual record, To connect your Oregon to your computer: 1. Lift the weather cap on the bottom of the Oregon. 2. Insert the smaller connector on the USB cable into the mini USB connector.