Garmin nüvi 4592LM Quick Start Manual page 18

1. Power button
2. miniUSB connector
3. 3.5mm audio output jack
4. Microphone
5. microSD card slot
6. Speaker
Using the Power Button
1. Turning the unit ON
Press and hold the Power button on top left hand side of the unit to turn the unit ON.
Alternatively, you can also connect the unit to a power source (i.e. vehicle power with
the bundled cable) before turning ON the unit.
2. Shutting the unit down
Long-press and hold the Power button when the unit is ON to turn the power OFF.
3. Sleep mode
The nüvi 4592LM supports sleep mode. After ending a navigation session, the user can
put the unit in sleep mode to keep the unit turned ON at minimal power consumption.
Once in sleep mode, the unit can remain in standby for approximately one week (with
full battery).
• When the unit is turned ON, press the Power button to put the unit in sleep mode.
• When the unit is in sleep mode, press the Power button to activate the unit and press
the Lock icon on the screen and slide upward to disable sleep mode. You can also
disable sleep mode by placing the unit onto the mount and the unit will return to normal
standby mode.
Should the unit freeze and become inoperable, long-press and hold the Power button for
10~15 seconds to shut down.
nüvi 4592LM Quick Start Manual
7. Mount connection port
8. Volume adjustment buttons
9. Driving recorder connecting port
10. Video input jack
11. miniUSB power connection port
NOTE
17