Magnavox 1VMN29896 Owner's Manual page 33

Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel on Cable
TV, set the PBS channel manually by following the steps
below.
1
Select "Manual" at step 4 in "Analog
Auto Clock Setting (Cable TV only)"
on page 32, then press [OK].
Use [the Number buttons] or [K / L]
2
to enter your Cable TV Analog PBS
channel number, then press [OK].
Set Channel No.
CH 1
3
Press [MENU] to exit and turn the
unit to the standby mode.
Digital Auto Clock Setting
Press [MENU] and use [K / L] to select
1
"General Setting", then press [OK].
"General Setting" menu will appear.
Use [K / L] to select "Clock", then
2
press [OK].
"Clock" menu will appear.
Use [K / L] to select "Auto Clock
3
Setting", then press [OK].
Use [K / L] to select "Manual", then
4
press [OK].
Auto Clock Setting
OFF
Auto
Manual
Enable Manual operation to select the DTV
Channel for receiving the Clock Data and
selecting your Time Zone below.
{
5
Press [{ ] to highlight "CH". Press
[K / L] to select "DTV", then press
[ B] .
Set Channel No.
DTV 1
Use [the Number buttons] or [K / L]
6
to enter the desired major channel
number to receive the Clock Data,
then press [OK].
SETTING THE CLOCK
7
8
Note for auto clock setting
• The clock may set itself automatically after this unit
• If the clock is not set correctly, timer recording does
• Analog off the air broadcasts have ended. Analog
• For digital auto clock setting, incorrect time may be
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Use [K / L] to select the desired time
zone, then press [OK].
Time Zone
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Press [MENU] to exit and turn the
unit to the standby mode.
This unit will search for the time only when the
power is in the standby mode. Initially leave it in
standby mode for at least 15 minutes to give this
unit time to set the clock. Once the clock is set, the
unit receives the clock data at 12:00 am & 12:00 pm
when unit is in standby mode. Check the time after
the Auto Clock was set, if it is incorrect time then set
the "Auto Clock Setting" to "OFF" in step 4 above.
Then try "Manual Clock Setting" on page 34.
receives the antenna/cable signal and plug in the
power cord.
not work properly.
auto clock setting will no longer be available except
via Cable TV. Try digital auto clock setting in this
case.
obtained depending on the broadcast information.
If this occurs, set the "Auto Clock Setting" to "OFF" at
step 4 and try "Manual Clock Setting" on page 34.
Time adjustment for each time zone
GMT (Greenwich Mean Time ) - 4 hours
GMT (Greenwich Mean Time ) - 5 hours
GMT (Greenwich Mean Time ) - 6 hours
GMT (Greenwich Mean Time ) - 7 hours
GMT (Greenwich Mean Time ) - 8 hours
GMT (Greenwich Mean Time ) - 9 hours
GMT (Greenwich Mean Time ) - 10 hours
EN EN 33