Connection; Antenna Connection (Required); Overview - Magnavox 1VMN29896 Owner's Manual

Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• When "Progressive Scan" is set to "ON", no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

Antenna Connection (Required)

rear of this unit
VIDEO VIDEO
Y
IN OUT
IN
L L
OUT
R R
IN OUT COAXIAL
AUDIO IN
ANTENNA S-VIDEO AUDIO OUT S-VIDEO
( L1 )
This connection is for
TV pass through only
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. HDD / DVD playback through the RF is not possible.
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.

Overview

If Your TV has
Higher
HDMI IN
Quality
COMPONENT VIDEO IN
S-VIDEO IN
Standard
R
Quality
AUDIO IN

CONNECTION

RF coaxial
Choose one of the following connections
depending on the jacks on your TV.
L
VIDEO IN
cable
ANT. IN
IN
OUT
ANTENNA
RF coaxial
cable
Refer to
page
If you are using
17
cable / satellite box
page
17
If your device has
page
only an ANT. IN jack
16
page
16
VHF / UHF
antenna
or
cable TV
company
page
page
ANT. IN
19
20
EN EN 15