Hdmi - Magnavox 1VMN29896 Owner's Manual

HDMI

SETUPS
1
Press [MENU] in stop mode and use
[K / L] to select "General Setting",
then press [OK].
Use [K / L] to select "HDMI", then
2
press [OK].
Playback
Display
Video
Recording
Clock
Channel
HDMI
Use [K / L] to select a desired item,
3
then press [OK].
1 Format
2 HDMI Audio
3 RGB Range
4 fun-Link (HDMI CEC)
4
When you finish with the setting,
press [MENU] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
• When the connected device is not compatible with the Y/
Cb/Cr, HDMI signal is output as RGB regardless of the setting.
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(Such as when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to "OFF" when the HDMI sound is not output.
Your setting will be activated.
Instructions continue on the next page.
Format
RGB
YCbCr
HDMI Audio
ON
OFF
EN EN 113