●
To enhance the outline of the image [Outline Enhancer]
When the image with the resolution lower than the recommended resolution is displayed in
"Full" or "Enlarged" mode, characters and/or lines of the displayed image may appear blurred.
In this case, you can adjust <Outline Enhancer> to sharpen the image.
Procedure
1.
Choose <Color> from the Adjustment menu, and press
2.
Choose <Advanced Settings> from the <Color> menu, and press
3.
Choose <Outline Enhancer> , and press
4.
Select the display status in the range from -3 to 3 (soft to sharp) with
desired.
5.
Press
to exit the adjustment.
●
To adjust the gain value [Gain]
Each luminance of red/green/blue composing the color is called "Gain". The gain adjustment
may change the color tone of the "White" (when the max input signal for each color is obtained)
Adjustable range: 0 to 100%
Procedure
1.
Choose <Color> from the Adjustment menu, and press
2.
Choose <Advanced Settings> from the <Color> menu, and press
3.
Choose <Gain>, and press
4.
Choose the color for adjustment among <Red>, <Green>, or <Blue> to adjust, and press
.
5.
Adjust the gain with
6.
Press
to exit the adjustment.
Tips
•
The gain value may change depending on the value of the color temperature.
•
When changing the gain value, the color temperature adjusting range is changed to "User".
●
To adjust six colors [6 Colors]
The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green,
Cyan, and Blue.
Adjustable range: -100 to 100
Procedure
1.
Choose <Color> from the Adjustment menu, and press
2.
Choose <Advanced Settings> from the <Color> menu, and press
3.
Choose <6 Colors>, and press
4.
Choose the color for adjustment among <Magenta>, <Red>, <Yellow>, <Green>,
<Cyan>, or <Blue>, and press
5.
Select <Hue> or <Saturation>, and press
6.
Adjust the 6 colors with
7.
Press
to exit the adjustment.
.
.
or
.
.
.
.
or
.
Chapter 3 Adjustment and Settings
.
.
or
.
.
.
.
as