Yanmar 6LPA-STP2 Operation Manual page 25

6lpa series
Hide thumbs Also See for 6LPA-STP2:
Table of Contents

Advertisement

Switches and Gauges
Switch or Gauge
(2)
(1)
Starter (Key) Switch
Engine Stop Button
Warning Alarm (Buzzer)
Warning Indicators
Alarm (Buzzer) Stop Switch
Backlight Switch
Hourmeter
Engine (Lube) Oil Pressure Gauge
Fresh Water (Coolant) Temperature Gauge
Turbocharger Boost Pressure Gauge
Preheat Indicator (If equipped)
*
The engine cannot be stopped by the starter (key) switch. Use the engine stop button to turn engine OFF.
**
Releasing the engine stop button before the engine has stopped rotating will cause the engine to continue to
run.
6LPA Series Operation Manual
(3)
(4)
0003622
© 2007 Yanmar Marine International
Function
OFF (2): The key can be inserted or removed from switch. All
*
power is turned off.
ON (3): For engine operation. Gauges and alarms are
operational.
START (4): For starting engine. When key is released after
engine starts, key automatically moves to ON position. NOTICE:
NEVER hold the key in the START position for longer than
15 seconds or the starter motor will overheat.
GLOW (1): For air heater (optional).
Press the button to stop the engine by cutting off the fuel flow.
Continue to press the button until the engine has stopped.
The alarm sounds if an abnormality is detected. See Warning
Devices on page 20.
The lamps illuminate when an abnormality is detected. See
Warning Devices on page 20.
The switch is used to shut the alarm off temporarily. Turn the
alarm (buzzer) OFF when inspecting for cause.
WARNING! Inspect and repair the abnormality
immediately.
Turns instrument panel backlighting OFF or ON.
Shows the total number of operating hours. Can be used as a
guide for periodic maintenance checks. The hourmeter is
located at the bottom of the tachometer.
Shows the engine (lube) oil pressure.
Shows the cooling fresh water temperature.
Shows the intake air pressure (intake air boost pressure of
turbocharger).
Illuminates when the air heater is heating up for easier starting
in cold temperatures. Indicator is located in the warning lamp
cluster.
PRODUCT OVERVIEW
**
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6lpa-stzp2

Table of Contents