Table of Contents
Advertisement
DSL-2740E User Manual
The following table describes the parameters of this page:
Field
Select it to enable SNMP function. You need to
Enable SNMP
enable SNMP, and then you can configure the
parameters of this page.
Enter the trap IP address. The trap information is
Trap IP Address
sent to the corresponding host.
Community Name
The network administrators must use this password
(Read-only)
to read the information of this router.
Community Name
The network administrators must use this password
(Read-Write)
to configure the information of the router.
3.3.11.6 TR-069
TR-069 is a WAN management protocol. It is a bidirectional SOAP/HTTP based
protocol providing the communication between the ADSL router and an Auto
Configuration Server (ACS) to monitor status and performance and to set
configuration parameters from WAN side.
Choose Advanced > Network Tools > TR-069. The TR-069 Configuration page
shown in the following figure appears. You may change the setting for the ACS
parameters.
Description
76
Hide quick links:
Advertisement
Table of Contents
