D-Link DSL-2740E User Manual page 56

DSL-2740E User Manual
The following table describes the parameters and buttons of this page:
Field
Select the router interface. You can select LAN or
Direction Select
WAN. In this example, LAN is selected.
LAN ACL Switch Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only
the IP address that is in the same network segment
IP Address
with the IP address of the specified interface can
access the router.
You can choose the following services from LAN:
Services Allowed Web, Telnet, SSH, FTP, TFTP, SNMP and PING.
You can also choose all the services.
After setting the parameters, click it to add an entry
Add
to the Current ACL Table.
Reset Click it to refresh this page.
When the direction of data packets is set to WAN, the page shown in the following
figure appears.
Description
50