Table of Contents
Advertisement
RSio64-D
3)
If one Brooklyn2 is found, press [Stop Scan] button.
4)
Put a mark in the check box and press [Start] button.
When WARNING dialog appears, press [OK] button.
5)
When "Recovery image uploaded" appears, press [OK]
button.
86
6)
Wait until that Brooklyn2 appears on Dante Controller in
black.
At this point, this Brooklyn2 is activated in the Recovery
Image mode.
5. Writing in Recovery Image mode
Return to Dante Firmware Update Manager and press the
[Back] button to have the initial screen displayed.
Execute updating from Recovery Image to Normal
Firmware.
6. Caution
W hen Brook ly n 2 is operat i ng i n t he Emergency
Firmware and Recovery Image mode, the function of
Brooklyn2 to drive Ethernet is weak. So, it may affect
proper updating depending on the PC and its Ethernet
adapter. In such case, try again by using another PC or
putting SW-HUB in-between.
Advertisement
Table of Contents
