Table of Contents
Advertisement
2-11. THERMO SENSOR Inspection
Contents: Check of temperature sensor.
(Example of screen)
OUTPUT result
This is displayed in Property window as below.
* The example is written down in the column of Value.
Value
Field
(Example)
Thermo Sensor
0202h
Supplementary note
AD value of sensor
2-12. LED inspection
Contents: LEDs' lightning from the left are inspected
visually.
Rear LED for Dante Ethernet (Primary/
Secondary) is inspected.
POWER LED (INT) turned on is inspected
visually.
POWER LED (EXT) turned on is inspected
visually.
Caution
Results must be input by the operator. Follow the
instructions given in the dialogs.
Input a judged result after inspection fi nish (SYNC orange
LED goes out) at the time of a LED Rotation inspection.
At the time of LED Rotation inspection, after SLOT 1 -
4 (LOCK, SRC) LED and WORD CLOCK LED turn on
green - > red, it moves from them to the following LED.
Dante PRIMARY/SECONDARY LED is on rear panel.
SLOT ACTIVE LED is on rear panel.
(Example of screen)
OUTPUT result
• Normal condition
The result is displayed in Output window as below.
Item
Character string to be displayed
LED Rotation
OK: LED Rotation
DANTE LED
OK: DANTE LED
POWER LED INT
OK: POWER LED
POWER LED EXT
OK: POWER LED EXT
• In case of failure
The result is displayed in Output window as below.
Item
Character string to be displayed
LED Rotation
NG: LED Rotation
DANTE LED
NG: DANTE LED
POWER LED INT
NG: POWER LED
POWER LED EXT
NG: POWER LED EXT
RSio64-D
57
Advertisement
Table of Contents
