No_Valid_License (Id: 07200004); Application_Control_Disabled (Id: 07200005); Application_Control_Disabled (Id: 07200006) - D-Link DFL-260E Log Reference Manual

Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.4.4. no_valid_license (ID: 07200004)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.4.5. application_control_disabled (ID: 07200005)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision

2.4.6. application_control_disabled (ID: 07200006)

Default Severity
Log Message
The end of an application protocol has been recognized by the
application control function.
None
None.
2
application
origsent
termsent
ssl_inspected
Connection
CRITICAL
Application Control disabled
Application Control has been disabled due to license restriction.
application_control_disabled
Extend valid time for Application Control.
3
CRITICAL
Application Control disabled
Application Control has been disabled due fatal subsystem failure.
Traffic will be treated as 'unknown' by Application Control.
treat_traffic_as_unknown
Restart the device or restore the system from a full system backup to
restore Application Control functionality. It is also possible to
configure the device to automatically restart if Application Control is
disabled due to fatal failure through the Application Control setting
'Restart On Fatal Failure'.
1
CRITICAL
Application Control disabled
185
Chapter 2: Log Message Reference