Failure_Connect_H323_Server (Id: 00200316); Com_Mode_Command_Message_Not_Translated (Id: 00200317); Packet_Failed_Initial_Test (Id: 00200350) - D-Link DFL-260E Log Reference Manual

Recommended Action
Revision
Context Parameters

2.1.149. failure_connect_h323_server (ID: 00200316)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters
2.1.150. com_mode_command_message_not_translated (ID:
00200317)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.151. packet_failed_initial_test (ID: 00200350)

Default Severity
Log Message
None.
1
ALG Module Name
ERROR
H323ALG: Failed to connect to the H.323 Server. Closing connection
The unit failed to connect to the H.323 Server, resulting in that the
ALG session could not open successfully.
close
Verify that there is a listening H.323 Server on the specified address.
1
ALG Module Name
ALG Session ID
WARNING
H323ALG: CommunicationModeCommand not translated.
The H.245 Communication Mode Command message is not
translated.
None
None.
1
peer
ALG Module Name
ALG Session ID
Connection
WARNING
TFTPALG: Packet failed initial test (Invalid TFTP packet). Packet
length <packet_length>
105
Chapter 2: Log Message Reference