Base64_Decode_Failed (Id: 00200658); Command_Blocked (Id: 00200659); Unknown_Command_Blocked (Id: 00200660) - D-Link DFL-260E Log Reference Manual

2.1.278. base64_decode_failed (ID: 00200658)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.279. command_blocked (ID: 00200659)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.280. unknown_command_blocked (ID: 00200660)

Default Severity
Log Message
Explanation
Gateway Action
ERROR
IMAPALG: Base 64 decode failed. Attachment blocked
The data sent to Base64 decoding failed. This can occur if the email
sender sends incorrectly formatted data. The attachment has been
blocked.
block_data
Research how the sender is encoding the data.
1
filename
filetype
sender_email_address
ALG Module Name
ALG Session ID
WARNING
IMAPALG: Command <command> blocked.
The client is sending command that are not allowed. The command
will be blocked.
block
If the command are
configuration.Note: The STLS command is allways blocked!.
1
command
ALG Module Name
ALG Session ID
WARNING
IMAPALG: Unknown command blocked.
The client is sending unknown command. The command will be
blocked.
block
156
Chapter 2: Log Message Reference
to be allowed change the Alg