Failed_Create_New_Session (Id: 00200381); Failed_Connect_Pop3_Server (Id: 00200382) - D-Link DFL-260E Log Reference Manual

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.176. failed_create_new_session (ID: 00200381)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters

2.1.177. failed_connect_pop3_server (ID: 00200382)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters
WARNING
POP3ALG: Maximum number of POP3 sessions (<max_sessions>) for
service reached. Closing connection
The maximum number of concurrent POP3 sessions has been
reached for this service. No more sessions can be opened before old
sessions have been released.
close
If the maximum number of POP3 sessions is too low, increase it.
1
max_sessions
ALG Module Name
WARNING
POP3ALG: Failed to create new POP3ALG session (out of memory)
An attempt to create a new POP3ALG session failed, because the
unit is out of memory.
close
Decrease the maximum allowed POP3ALG sessions, or try to free
some of the RAM used.
1
ALG Module Name
ERROR
POP3ALG: Failed to connect to the POP3 Server. Closing the
connection.
The unit failed to connect to the remote POP3 Server, resulting in
that the ALG session could not be successfully opened.
close
Verify that there is a listening POP3 Server on the specified address.
1
ALG Module Name
ALG Session ID
115
Chapter 2: Log Message Reference