5
Installation and operation
V
CAUTION!
Follow the safety instructions in chapter
5.1
Access to the drives
5.1.1
Access to the accessible drives (floorstand model)
Figure 10: Removing the drive cover and snapping it into the hard disk drive cover
Ê Unlock the server (1).
Ê Remove the drive cover (2).
Ê Place the drive cover on the hard disk cover (3).
I
Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the acces-
sible drives must not be obstructed.
The drive cover is replaced and the server locked in the reverse order.
TX200 S5
"Important notes" on page
Operating Manual
27.
59