Canon Super G3 FAX Board-AP1 Service Manual page 43

5
Service Mode > Test Mode (TEST) > MODEM Test > DTMF Transmission Test Service Mode
Caution:
'300-ALL0' through '300-4:1' are not currently supported.
5 Service Mode > Test Mode (TEST) > MODEM Test > DTMF Transmission Test Service Mode
■ DTMF Transmission Test
Of the items indicated below, press one; in response, the DC circuit will be closed and
the selected DTMF signal will be transmitted using the DTMF transmission function of the
modem. You can also monitor the transmission signal by listening to the speaker. To stop the
operation and to end test mode, press the
Sssw Menu Num Ncu Type
<MODEM> <DTMFTX>
LONG 0 1 2 3 4 5 6 7 8 9 * #
SHORT 0 1 2 3 4 5 6 7 8 9 * #
Using Text Mode
1) From the items indicated on the screen, select the item you want to test; then, press the
key on keypad that corresponds to the DTMF signal to test.
Caution:
'SHORT' is not currently supported.
key.
IPFAX Print Clear Test Report
<READY>
<1/1>
OK
F-5-19
5-22
5-22