Canon Super G3 FAX Board-AP1 Service Manual page 42

5
Service Mode > Test Mode (TEST) > MODEM Test > G3 Signal Transmission Test (G3 Tx) Service Mode
■ Frequency Test (FREQ)
Of the items indicated below, press one; in response, the DC circuit will be closed and the
selected frequency will be transmitted using the tone transmission function of the modem.
You can also monitor the transmission signal by listening to the sound generated by the
speaker. To stop the operation and end test mode, press the
Sssw Menu Num Ncu Type
<MODEM> <FREQ>
RBT
462Hz
1100Hz
1300Hz
1500Hz
1650Hz
1850Hz
2100Hz
Caution:
'RBT' is not currently supported.
5 Service Mode > Test Mode (TEST) > MODEM Test > G3 Signal Transmission Test (G3 Tx) Service Mode
key.
IPFAX Print Clear Test Report
<READY>
<1/1>
OK
F-5-16
■ G3 Signal Transmission Test (G3 Tx)
Of the items indicated below, press one. In response, the DC circuit will be closed and the
selected frequency will be transmitted using the G3 signal transmission function of the
modem. You can also monitor the transmission signal by listening to the sound generated by
the speaker. To stop the operation and end test mode, press the
Sssw Menu Num Ncu Type IPFAX Print Clear
<MODEM> <G3TX>
300bps
2400bps
4800bps
7200bps
9600bps
TC7200
TC9600
12000bps
Sssw Menu Num Ncu Type IPFAX Print Clear
<MODEM> <G3TX>
14400bps
300-ALL0
300-ALL1
300-1:1
300-1:4
300-4:1
5-21
key.
Test Report
<READY>
<1/2>
OK
F-5-17
Test
Report
<READY>
<2/2>
OK
F-5-18
5-21