11.2 Alignment parameters
The "alignment point" is deined as the position inside the ticket to use for the notch alignment.
The distance between the notch edge and the alignment point is deined as "B. Mark distance".
Referring to the front of the b. mark, the value of "B. Mark distance" varies from 0mm minimum and 12.9mm maximum.
If the "B. Mark distance" value is set to 0, the alignment point is set at the beginning of the notch.
Alignment
Alignment
point
point:
notch front
PRINTING DIRECTION
positive values of
"B. Mark distance"
+
0
102