Using Digit Training; Phone Status Command; Asr Help Command - Sanyo SCP-5600 User Manual

Using Digit Training

This feature allows you to train the phone to recognize your voice.
You can get better recognition accuracy by programming your
intonation pattern into your phone.
To program Digit Training:
1. Press and hold or
2.
Say "Tools."
3. Say "Digit Training."
4. Say "Start" or press Start (left softkey) to start programming.
5.
Follow the voice prompts and recite the digits into your phone's
microphone. (A voice prompt will indicate the current rate of
adaptation.)
6.
Respond to the voice prompt repeatedly until adaptation is
complete. (When you are finished training, you will hear a
confirmation that the adaptation has been successfully
completed.)
Note: Try digit training in a quiet environment for the best results. When you train,
make sure you speak clearly and distinctly in your natural voice.
To activate Digit Training:
1.
Press and hold or
2.
Say "Tools."
3. Say "Digit Training."
4. Say "On" or press On (right softkey) to activate the existing data.
(A voice prompt will announce the activation of digit training.)
To deactivate Digit Training:
1.
Follow steps 1-3 above.
2. Say "Off" or press Off (right softkey) to deactivate the existing
data. (A voice prompt will announce the deactivation of digit
training. The adaptation returns to its default setting.)
92
to activate the Command menu.
to activate the Command menu.

Phone Status Command

This feature uses a voice prompt to tell you your phone number and
current signal strength.
To activate Phone Status Command:
1.
Press and hold or
2. Say "Phone Status." (You will hear your phone number and signal
strength.)

ASR Help Command

This feature will help you learn the basics of using automatic speech
recognition.
To activate Help Command:
1. Press and hold or
2. Say "Help." (You will hear a brief summary of available automatic
speech recognition commands.)
to activate the Command menu.
to activate the Command menu.
93