12. Push 2 Talk; Getting Started With Push 2 Talk; Setting Push 2 Talk Mode; Preparing Your Phone For Push 2 Talk Service - Sanyo SCP-5600 User Manual

12. Push 2 Talk

Getting Started With Push 2 Talk

Push 2 Talk allows you to enjoy quick, two-way, "walkie-talkie-style"
communication with your friends, family, and co-workers. You can
make 1-to-1 or 1-to-many calls (up to 5 others on the same call) to any
other Push 2 Talk user, anywhere on the home network. You can
make and receive Push 2 Talk calls when your phone displays the or
icon.

Setting Push 2 Talk Mode

To enable or disable Push 2 Talk mode:
1.
Press to access the main menu.
2. Select Settings and press
3. Select Push 2 Talk and press
4. Select Enable/Disable and press
5. Select Enable and press
Enable: Lets you make or receive Push 2 Talk calls any time
your phone is not in use.
Disable: Disables your phone's Push 2 Talk service; you will
not be able to make or receive Push 2 Talk calls or access
your Push 2 Talk contacts.
Tip: If you haven't signed up for the Push 2 Talk service and Push 2 Talk mode is
set to , or the Push 2 Talk service is locked, you can use the Push 2 Talk/
Disable
Recorder Button ( ) as a Voice Recorder button in standby mode.

Preparing Your Phone for Push 2 Talk Service

Every time you turn on your phone, your phone will identify itself
and make itself available to the Push 2 Talk network. The icon
appears on the display. Your phone is now ready to make and receive
Push 2 Talk calls.
118
.
.
.
. (The default setting is Disable.)

Push 2 Talk Call Alerts

There are several ways your phone alerts you during Push 2 Talk calls.
When you make or receive a Push 2 Talk call:
The phone sounds (depending on the Ringer Type and Ringer
Volume setting).
The backlight illuminates.
The screen displays a Push 2 Talk call message.
The other party's Push 2 Talk number and name (if available) are
displayed.
The screen displays who has the floor.
The status of a Push 2 Talk call:
The Green LED On indicates you have the floor and may speak.
The Red LED On indicates another contact has the floor.
The LED Off indicates the floor is open. (You can take the floor
and speak by pressing and holding
Push 2 Talk Display Screens
Push 2 Talk Main Screen
Redial Contact
Current List
Contact Names
Go to (left softkey)
Push 2 Talk In-Call Screen
.)
Options (right softkey)
Contact Name
P2T Number
Floor Status
119