Sanyo SCP-5600 User Manual page 76

Dual band/tri mode phone
Table of Contents

Advertisement

Image Controls to select an option from the following:
Brightness to select Auto or Manual brightness control.
White Balance to adjust white balance based on changing
conditions.
Camera Settings to select your settings. (See "Selecting Camera
Settings" on page xx for details.)
Pics In Camera to go to your phone's In Camera folder. (See
"In Camera Folder" on page xx for details.)
Pics In miniSD to go to your miniSD folder (if available).
Go to Camcorder to switch to video mode. (See "Taking Videos" on
page xx for details.)
Key Guidance to indicate the key functions in camera mode.
Load My Favorite to load your favorite setting. (See "Setting Your
Favorite Mode" on page xx for setting your favorite mode.)
Using the Macro/Normal Switch
The macro/normal switch located on the front of the phone allows
you to take close-up shots. Slide the macro/normal switch to switch
between Normal and Macro (close-up) modes. When you select
Macro mode, the
icon appears on the display.
Note:
After using the camera for close-up shots ("Macro" mode), it is important
to switch the camera back to the "Normal" setting.
Note:
Placing the switch in between the macro and normal setting may result in
out-of -focus images. For best results, slide the switch completely to one end or
the other.
140
Macro
Normal
Setting the Flash
To activate the flash:
1.
From camera mode, press Options (right softkey).
2.
Highlight Flash and press
3.
Select an option from the following and press
On This Shot to activate the flash for one shot.
On Always to activate the flash all the time.
Auto to activate the flash automatically.
4.
Take a picture using the phone's main LCD as a viewfinder.
To deactivate this feature, select Off during step 3 above.
Tip:
When the phone is open and in camera mode, press
between flash modes.
Setting the Self-timer
To activate the Self-timer:
1.
From camera mode, press Options (right softkey).
2.
Highlight Self-timer and press
3.
Highlight the length of delay you want the timer to use
(10 seconds or 5 seconds) and press
4.
Press Start (left softkey) when you are ready to start the timer.
(The
icon appears on the lower left portion of the main LCD.)
5.
Get ready for the picture. (When the timer is down to three
seconds, the Self-timer icon will turn red [ ] and the phone
will begin to beep.)
Note:
After taking a picture, Self-timer settings return to off.
To cancel the Self-timer after it has started:
Press Cancel (right softkey).
Note:
While the Self-timer is active, all keys are disabled except
and
(right softkey).
Cancel
.
.
to switch
.
.
,
,
141

Advertisement

Table of Contents
loading

Table of Contents