Using Digit Training - Sanyo SCP-7500 User Manual

Using Digit Training

This feature allows you to train the phone to recognize your
voice when speaking a phone number. You can get better
recognition accuracy by programming your intonation pattern
into your phone.
To program Digit Training:
1. Press
to activate the Command menu.
2. Say "Tools."
3. Say "Digit Training."
4. Say "Start" or press
5. Follow the voice prompts and recite the digits into your
phone's microphone. (A voice prompt will indicate the
current rate of adaptation.)
6. Respond to the voice prompt repeatedly until adaptation is
complete. (When you are finished training, you will hear a
confirmation that the adaptation has been successfully
completed.)
Note:
Try digit training in a quiet environment for the best results. When
you train, make sure you speak clearly and distinctly in your natural voice.
To activate Digit Training:
1. Press
to activate the Command menu.
2. Say "Tools."
3. Say "Digit Training."
4. Say "On" or press
data. (A voice prompt will announce the activation of digit
training.)
Start
(left softkey) to start programming.
On (right softkey) to activate the existing
93