Universal Serial Bus Ports - DFI-ITOX G4E606-P User Manual

2.5.5 Universal Serial Bus Ports

USB 2
USB 1
Two onboard USB 2.0/1.1 ports (Black) are at location CN4 of
the system board.
J7 allows you to connect 2 additional USB 2.0/1.1 ports for USB
3 and USB 4. The additional USB ports, which are mounted on a
card-edge bracket, will be provided as an option. If you wish to
use the optional USB ports, install the card-edge bracket to the
system chassis then insert the connector that is attached to the
USB port cables to J7.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals
submenu of the BIOS. Refer to chapter 3 for more information.
If you are using a USB 2.0 device, you must enable the USB 2.0
function in the same BIOS submenu mentioned above.
Hardware Installation
USB 3-4
2
1
2
10
9
31