Finishing - Heatilator GCDC60 Installation & Operating Instructions Manual

1. Combustible Finishing Material
Material made of or surfaced with wood, compressed
paper, plant fibers, plastics, or any material capable
of igniting and burning, whether flame proofed or not,
plastered or unplastered (this includes drywall).
2. Noncombustible Finishing Material
Material which will not ignite and burn. Such materials
are those consisting entirely of steel, iron, brick, tile,
concrete, slate, glass or plasters, or combination
thereof, or have a UL Fire rating of Zero (0).
3. High Temperature Sealant Material
Sealants that will withstand high temperatures:
General Electric RTV103 (Black) or equivalent and
Rutland, Inc. Appliance Mortar #63, or equivalent.
A bead of high temperature sealant, 1/8 in. inch wide
minimum, must be used to close off gaps between
the appliance and facing to prevent cold air leaks.
f i r e - p a r t s . c o m
See Figure 16.
A combustible mantel may be installed. Please refer
to Figure 4, page 7.
16
CALIBER B-VENT INSTALLATION INSTRUCTIONS
G. FINISHING
Grilles on this appliance cannot, in any way, be cov-
ered as it may create a fire hazard.
31282 Rev Q
Figure 16 - Finishing Materials
WARNING!
09/04