Lexmark S800 Series Service Manual page 52

Lexmark S800 Series
5. Place a spring hook behind the right hinge between the camera lid and tube (C), and gently pull the tube past
the latch to disconnect the camera assembly. Repeat to disconnect the left side.
6. Remove the flat ribbon cable thought the opening of the top cover.
7. Without cutting the wire tie, unloop the black cable from the torroid, and pull through the opening of the top
cover.
Note: If then torroid needs to be removed, then be sure to reinstall it.
8. Lift the camera assembly with the front door and operator panel, and remove.
4-17
Service Manual