Outer Rack Rails - Supero 2022TG-H6IBQRF User Manual

A+ SERVER 2022TG-H6IBQRF/H6RF USER'S MANUAL

Outer Rack Rails

Outer rails attach to the rack and hold the chassis in place. The outer rails for the
SC827 chassis extend between 30 inches and 33 inches.
Installing the Outer Rails to the Rack (Figure 2-3)
1. Secure the back end of the outer rail to the rack, using the screws provided.
2. Press the button where the two outer rails are joined to retract the smaller
outer rail.
3. Hang the hooks of the rails onto the rack holes and if desired, use screws to
secure the front of the outer rail onto the rack.
4. Repeat steps 1-3 for the remaining outer rail.
1
2
Installing the Chassis into a Rack (Figure 2-4)
Stability hazard. The rack stabilizing mechanism must be in place, or
the rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Warning: Do not pick up the server with the front handles. They are
designed to pull the system from a rack only.
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both
sides. When the chassis has been pushed completely into the rack, it should
click into the locked position.
4. Optional screws may be used to secure the to hold the front of the chassis to
the rack.
Figure 2-3. Assembling the Outer Rails
2-6
1
1
1
3