Southbridge Configuration; Ide Configuration - Supero 2022TG-H6IBQRF User Manual

A+ SERVER
2022TG-H6IBQRF/H6RF USER'S MANUAL
Memory Timing Parameters
This selects the which node's timing parameters to display. Options include
CPU Node 0, CPU Node 1, CPU Node 2 or CPU Node 3.
 SouthBridge Configuration
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or
EHCI bus devices.
USB 2.0 Controller Mode
Use this setting to configure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed
Mode) or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy
support if there are no USB devices installed in the system. "Auto" disabled
Legacy support if no USB devices are connected. The options are Disabled,
Enabled and Auto.
 IDE Configuration
OnChip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
OnChip SATA Type
Use this setting to set theOn Chip SATA type. Options include
Native IDE, RAID, AMD_AHCI and Legacy IDE.
RAID Codebase
This submenu appears when you choose "RAID" from the "OnChip SATA
Type" setting above. This setting allows you to select the codebase for your
RAID setup. Options are either Adaptec or DotHill.
SATA IDE Combined Mode
This setting allows you to Enable or Disable the SATA IDE combined mode.
7-6