Before deploying and configuring the GWN7600, the device needs to be properly powered up and
connected to the network. This section describes detailed information on installation, connection and
warranty policy of the GWN7600.
Equipment Packaging
GWN7600 Access Point Ports
Port
Description
Power
Power adapter connector (24V, 1A).
NET/PoE
Ethernet RJ45 port (10/100/1000Mbps) supporting PoE (802.3af).
Ethernet RJ45 port (10/100/1000Mbps) to your router or another
NET
GWN7600 series.
USB 2.0 port (for future IOT & location based applications).
Factory reset button.
RESET
Press for 7 seconds to reset factory default settings.
A quick press on reset button will just reboot the unit.
INSTALLATION
Table 2: GWN7600 Equipment Packaging
Main Case
Mounting Bracket
Ceiling Mounting Bracket
Plastic Expansion Bolt
M3 NUT
Screw (PM 3 x 50)
Screw (PM 3.5 x 20)
Quick Installation Guide
GPL License
Figure 1: GWN7600 Ports
Table 3: GWN7600 Ports Description
GWN7600 User Manual
Yes (1)
Yes (1)
Yes (1)
Yes (3)
Yes (3)
Yes (3)
Yes (3)
Yes (1)
Yes (1)
P a g e
|
14