Table of Contents
Advertisement
Getting started
Installation
You must install and
charge the battery before
using the telephone.
Install the telephone base close to a telephone jack and a power outlet not
controlled by a wall switch. The telephone base can be placed on a flat surface
or vertically mounted on the wall (see page 17). For optimum range and
better reception, place the telephone base in a central and open location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack (see page 10). The filter prevents noise and
caller ID problems caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
Your product may be shipped with protective stickers covering the handset
and telephone base displays - remove them before use.
For customer service or product information, visit our website at
www.telephones.att.com
1 (866) 288-4268
Avoid placing the telephone base and charger too close to:
Communication devices such as television sets, VCRs, or other
f
cordless telephones.
Excessive heat sources.
f
Noise sources such as a window with traffic outside, motors, microwave
f
ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
f
Excessive moisture.
f
Extremely low temperature.
f
Mechanical vibration or shock such as on top of a washing machine
f
or workbench.
STOP!
or call
.
See page 12-15 for
easy instructions.
1 (800) 222-3111
1
. In Canada, dial
Advertisement
Table of Contents
