Cabinet (G) Assembly - Sony DCR-PC101E Service Manual

DCR-PC101/PC101E

2-8. CABINET (G) ASSEMBLY

9 Open the jack cover
qd Cabinet (G) assembly
1 Special screw
6 Screw
(M2.6)
(M1.7)
2 Sleeve
(front)
7 Four screws
(M1.7 × 4)
3 Hold grip assembly
4 Sleeve
(rear)
5 Two screws
qa
(M1.7)
0 Pull the bottom part of cabinet (G) assembly
8 Two screws
in the direction of arrow, and then remove the claw.
(M1.7 × 4)
qs Eject knob
Charge lever Eject knob
When install the eject knob,
charge lever is made into the position of a figure.
Note: Make sure to perform checking of operations
after the installation.
2-6