Table of Contents
Advertisement
To protectthe oven door window:
1. Do not use abrasive cleaningagents such as steel wool
scouring pads or powdered cleansers as they may
scratchthe glass.
2. Do not hit the glass with pots, pans, furniture, toys, or
other objects.
The oven rack is designed with a safety lock-stopposition.
3. Do not closethe oven door untilthe oven racks are in
This preventsthe rack from accidently coming completely
out of the oven when pulling the rack out to add or remove
place,
food.
Scratching,hitting, jarring or stressingthe glass may
weaken its structure causing an increased risk of
To remove oven rack:
breakage at a later date.
1. When rack is cool, pull rack straight out until it stops at
the lock-stopposition.
NOTE: if it is necessaryto change rack position when
reck is hot, use potholdersto protect hands.
2. Tilt the front end of the rack up.
3. Continuepulling rack out of oven.
• Disconnect powerto rangeby tripping circuit
_,,__
C
_
RACK
breaker or removing fuse before replacinglight
_
SUPPORT
/
• Be sure bulb is cool before touchingor replacing
handswhen replacing
° Donot touchhot bulbwitha dampclothas this
may causethe bulbto break.
......
To replaceoven rack:
1. Place rackon the rack supports in oven.
To turn on the oven light: Push in
_1
2. Tilt the frontend of the rack up slightly,
rockerswitchlocatedonthe backguard
_
3. Slide rackbackuntilit clearsthe lock-stopposition.
for freestanding rangesand on the
manifoldpanelfor slide-inand drop-in
4. Lowerfrontof rackandsliderackstraight b ack into
ranges,
oven.
5. Pullrackoutto the lock-stop position to be sure rackis
correctly replaced,Push rackbackinto ovenand close
To replaceoven light bulb:
ovendoor.
t. Disconnect p owerto range.
2. Removelightbulband replace witha 40 wattappliance
bulb.
3. Reconnect powerto range. Resetclock, if equipped.
Advertisement
Table of Contents
