Names And Functions Of Parts - Sony DFW-V500 Manual

NAMES AND FUNCTIONS OF PARTS

DFW-V500
DFW-VL500
q Lens mount (C-mount) (DFW-V500)
w Built-in zoom lens (DFW-VL500)
e Flange back hole (DFW-V500)
Adjust the flange back using a standard head screwdriver.
r Screw hole for tripod mounting
t Camera fixing reference holes
y TRIG IN (Trigger) connector
Inputs the TTL level, negative polarity trigger signal.
u Camera connector (IEEE1394 connector)
Connect to the host equipment using the IEEE1394 cable
provided.
y y y y y Pin assignment of TRIG IN connector (female)
1. NC
2. GND
3. TRIG IN
4. NC
3
1
8
11
2
8
4 1
2
3
DFW-V500 DFW -V500
Digital Interface
TRIG IN
4
5
10
9
DFW DFW-VL500 -VL500
Digital Interface Digital Interface
TRIG IN TRIG IN
4
5
i Pilot lamp
Lights green when the power is turned on, and orange in the
isochronous transmission (enabled) state.
o ZOOM buttons (DFW-VL500)
Press the "T (telephoto)" side to obtain a smaller angle of view and
the "W (wide-angle)" side to have a larger angle of view.
!0 FOCUS buttons (DFW-VL500)
Press the "F" side to focus on farther objects and the "N" side to
focus on closer objects.
!1 Filter screw (DFW-VL500)
Connect a 37 mm aperture filter here.
u u u u u Pin assignment of camera connector
1. Power
2. Power (GND)
3. TPB–
4. TPB+
5. TPA–
6. TPA+
6 7
6 7
2 4 6
1 3 5
DFW-V500
DFW-VL500
5