Setting Screens; Other Settings; Troubleshooting; Navigation - Clarion NX505E Owner's Manual

Setting screens

1
MENU
2
Set image quality using
respective keys.
Day/Night Mode:
Switch to the day screen or night
screen.
The screen can be made easier to
view by manually switching to the
day screen, for example, when the
headlights are lit during the day
and the screen is difficult to view.
When Auto is selected, the screen
automatically switches to the night
screen when the parking light is lit.
MEMO:
• When the engine key is turned to
the "OFF" position then back to the
"ON" position, Auto is set.
Brightness:
Adjust the image quality
by or .
Image quality adjustments can
be set for both the day and night
screens.
During Smartphone linking, the
image quality of the smartphone
application screen can be adjusted.
42 NX505E

Other settings

1
MENU
2
Set the functions using
respective keys.
®
DivX VOD:
Displays the code required for
setting DivX VOD content to a
playable state (Register state) or
unplayable state (Deregister state).
This also changes the state
(Register state/Deregister state) of
the device being played.
Linked Device:
Sets the smartphone to be
connected when Smartphone
linking is performed. (Default:
iPhone)
Browser Cache:
Deletes the Browser cache.
Use this function when errors occur
on Intelligent VOICE or Intelligent
VOICE does not work correctly
even though the smartphone is
connected to the unit correctly.
Antenna Power:
Switches power ON/OFF of the
DAB antenna. (Default: ON)

Troubleshooting

The following kinds of symptoms sometimes are not malfunctions. First check the following
points before you ask for repair of the unit.

Navigation

Symptom
GPS reception is not displayed.
Own vehicle is out of position.
(Other electrical components are attached)

Audio

Symptom
There is lots of noise.
Stations cannot be tuned to
automatically.
DAB is not received.
The selected service is not played
while DAB is being received.
Remedy
Connect the antenna cable if it is not
connected.
Reception can be enabled by removing
obstructions, etc.
Positioning is sometimes not possible when
the placement of the satellite is poor.
Display appears by driving the vehicle.
Move attached electrical components
sufficiently away from the unit and the GPS
antenna wire.
Remedy
Tune to the correct frequency.  P.11
Manually select the station.  P.11
Check that "Antenna Power" is set to ON. 
P.42
Or move to a place with good reception.
The selected service might not be
broadcasting. Select a service currently
broadcasting.