Green Routing - Clarion NX505E Owner's Manual

•
Private roads, resident-only roads and walkways are excluded from
routes.
•
•
Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from
routes.
•
Road types used or avoided in route calculation:
•
•
•
•
•
Real-time Traffic events are also taken into account and sometimes greatly modify the route.
Clarion Mobile Map automatically recalculates the route if you deviate from the proposed
itinerary or if a newly received Traffic event concerns a part of the recommended route.
For further information about Route settings, see page 88.

5.1.5 Green routing

Route calculation is not only about finding the quickest or shortest route. For some of the
vehicle types, you can also check the fuel consumption and CO
route, and you can create cost effective routes with less effect on the environment.
In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel
consumption values and the price of the fuel. You can also select whether you want to see
the difference between your route and the green route even if the selected routing method is
not Green.
After the above parameters are set, select
get a fast but also fuel efficient route. Note that travel cost and CO
estimations only. They cannot take elevations, turns, curves and traffic conditions into
account. Also, this routing is not meant to give you the "greenest" route of all. It is still
important to travel quickly so the result is a fast route with low fuel consumption and CO
emission.
80 NX505E English
:
emission when planning a
2
as route planning method to
emission calculations are
2
2