Linking-Compatible Applications; Procedure Up To Smartphone Linking - Clarion NX505E Owner's Manual

❏ Linking-compatible
applications
To use Smartphone linking, linking-
compatible applications and application
management software "Smart Access" must
be installed on the software.
First, search for "Smart Access" from the
SM TM
App Store or Google Play and install
this.
Next, install the linking-compatible
applications. Start up Smart Access on
the smartphone and install the linking-
compatible applications from recommended
lists.
Linking-compatible applications are
scheduled to be added as they become
available.
For details on how to use applications,
refer to the Help for each application that is
started up on the smartphone.
❏ Procedure up to Smartphone
linking
The Smartphone linking procedure is as
follows.
Notice
• During Smartphone linking, operations on
the iPhone are not possible.
(For iPhone)
1. Set "iPhone" for "Linked Device" on
the Settings menu.  P.42
2. Start Smart Access on the iPhone.
3. (Only for the device with Lightning
connector)
Set "Usage Setting" in "BT Device
Connections" on the Settings
menu, and then connect iPhone via
Bluetooth.  P.27
32 NX505E
4. Connect the iPhone to the unit
For the device with 30-pin connector,
connect iPhone with the CCA-750 video
jack (sold separately) still connected to
the VTR cable.
For the device with Lightning connector,
the Lightning-Digital AV adapter (made
by Apple Inc.) and the HDMI cable (sold
separately) are necessary.
MEMO:
• For the device with Lightning connector,
the music and video in the iPhone cannot
be played from USB / iPod on the main
menu screen. Please use the Smart
Access linking-compatible application
"Media4car".
1. For the device with 30-pin connector
CCA-750
VTR cable (sold separately)
The unit
USB
connector
2. For the device with Lightning connector
Lightning-Digital
AV adapter (made
HDMI cable
by Apple Inc.)
(sold separately)
The unit
5. Start the application on the unit.
(For Android smartphones)
1. Set "Android" for "Linked Device" on
the Settings menu.  P.42
2. Start Smart Access on the
smartphone.
3. Set "Usage Setting" in "BT Device
Connections" on the Settings menu,
and then connect your smartphone
via Bluetooth.  P.27
4. Connect the unit to the smartphone.
The following two connection methods
are also available for some smartphones.
1. For MHL connection Connect to the
cigarette lighter port,
etc. on the vehicle to
supply power.
The unit
HDMI cable HDMI conversion cable
(sold separately) (commercially available
product)
2. For HDMI connection
The unit
HDMI cable
(sold separately)
Attention
• Use only an HDMI conversion cable that
supports EDID transfer.
5. Start the application on the unit.
Starting up applications
Notice
• The unit sometimes does not support
smartphone multi-touch or flicking
functions.
• Applications cannot be added or deleted
from the unit. Execute addition or deletion
of applications on the smartphone.
• During Smartphone linking, do not set
the smartphone to a sleep state. Doing
so might prevent the smartphone from
functioning properly.
MEMO:
• When Smart Access is used for the first
time, the Terms of Use confirmation
screen is displayed. Check the terms of
use, and touch Check .
• "!" will be displayed when there is a
new version of Smart Access available.
To update Smart Access, remove the
smartphone from the unit, and execute
the update by operating the application on
the smartphone.
1
MENU Smart Access
Start up Smart Access. The list of
linking-related applications installed
on the smartphone is displayed.
When an application is started up
on the smartphone, the screen is
switched to the application screen.
2
Select the application you want
to start up.
The application starts up. You can
operate the application from the
unit, in the same way as on your
smartphone.
Touch MENU Smart Access to
return to the application list screen.