Table of Contents
Advertisement
M
ULTI PURPOSE TRAY
1.
Open the multi purpose tray (a).
2.
Fold out the paper supports (b).
3.
Press gently down on the paper platform (c) to ensure it is latched down.
4.
Load the paper and adjust the paper guides (d) to the size of paper being used.
>
For single-sided printing on headed paper load the paper into the multi purpose
tray with pre-printed side up and top edge into the printer.
>
For two-sided (duplex) printing on headed paper load the paper with pre-printed
side down and top edge away from the printer. (Optional duplex unit must be
installed for this function.)
>
Envelopes should be loaded face up with top edge to the left and short edge into
the printer. Do not select duplex printing on envelopes.
>
Do not exceed the paper capacity of about 100 sheets or 10 envelopes. Maximum
stacking depth is 10mm.
5.
Press the tray latch button inwards to release the paper platform, so that the paper
is lifted and gripped in place.
6.
Set the correct paper size for the multi purpose tray in the Media Menu (see
functions" on page
23).
Loading paper > 21
a
c
d
b
d
"Menu
Advertisement
Table of Contents
