Removing The Chassis Fan; Prerequisites; Procedure - Dell XPS 8910 Service Manual

GUID-CF4B7AEA-F9A9-4432-8BD8-AB77D419F494

Removing the chassis fan

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-3DF715A5-7D2F-482F-AD0F-237354999DC7

Prerequisites

1 Remove the right-side
2 Follow the procedure from step 1 to step 2 in
3 Remove the blower and heat-sink
GUID-3DDE47B6-2DD3-4BDC-8D60-76B221B3A6B9

Procedure

1 Remove the chassis-fan cable from the routing guide on the chassis-fan bracket.
2 Disconnect the chassis-fan cable from the system board.
For more information, see
3 Remove the screw that secures the chassis-fan bracket to the chassis.
4 Slide the chassis-fan assembly towards the front of the computer to release the
fan from the chassis.
62
computer. After working inside your computer, follow
After working inside your
cover.
assembly. (if installed)
"System-board
computer. For more safety best
"Removing the power-supply
components".
Before
www.dell.com/
unit".