Post-Requisites; Clearing Cmos Settings; Prerequisites; Procedure - Dell XPS 8910 Service Manual

GUID-274C0409-D602-47AF-90ED-C3E86F4AC355

Post-requisites

1 Replace the right
2 Follow the procedure from step 9 to step 10 in
unit".
GUID-81AEAFE2-9020-416A-BAF7-C2EEBCF31184

Clearing CMOS settings

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-27373FF8-E85F-459D-8AE5-3A31E53B982C

Prerequisites

1 Remove the right
2 Follow the procedure from step 1 to step 3 in
GUID-2A199221-CDFC-4DFE-B196-DA786913BC78

Procedure

1 Locate the CMOS reset jumper (CMCLR) on the system board.
NOTE: For more information on the location of the CMOS jumper, see
"System-board
2 Remove the power cord.
3 Remove the jumper plug from the password jumper-pins (PSWD) and connect it
to the CMOS jumper-pins.
128
side-cover.
computer. After working inside your computer, follow
After working inside your
side-cover.
components".
"Replacing the power-supply
computer. For more safety best
www.dell.com/
"Removing the power-supply
Before
unit".