Table of Contents
Advertisement
5
Remove the system-board power cable from the routing guide on the chassis.
Figure 15. Disconnecting cables
1
optical drive power cable
3
CPU power cable
5
system board power cable
6
Rotate the power-supply unit cage towards the chassis.
7
Disconnect the hard-disk power cable.
NOTE: There could be up to three hard-disk power cables depending on
the quantity of hard-disk drive installed.
8
Remove the screws that secure the power-supply bracket to the chassis.
9
Remove the screws that secure the power-supply unit to the chassis.
2
routing guide
4
system board
55
Hide quick links:
Advertisement
Table of Contents
