Connecting The Video Cable - Philips DVDR3380 User Manual

Step 1: Basic Recorder Connections
EXT 2
TV-OUT ANTENNA-IN

Connecting the video cable

This connection enables you to view the
disc playback from the recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using a SCART cable
Use the SCART cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV set.
Helpful Hints:
– If your TV set has several SCART sockets,
select the SCART socket that is suitable for
both video output and video input.
– If your TV set displays a selection for the
SCART socket, select 'VCR' as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
EXT 1
TO TV - I/O
AUX - I/O
Option 1
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
Option 2
Option 2: Using an S-Video cable
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV
set.
Audio connection is required in order
to hear the sound, see the next section
"Connecting the audio cables".
Option 3: Using a Video (CVBS)
cable
Use a composite video cable (yellow -
not supplied) to connect the CVBS
OUT socket on the recorder to the
video input socket (or labelled as A/V In,
Video In, Composite or Baseband) on the
TV set.
Audio connection is required in order
to hear the sound, see the next section
"Connecting the audio cables".
(continued)
Option 3
15