Philips DVDR3380 User Manual page 51

PLAYBACK settings
Parental Rating
Level
Enter Password
* * * *
OK Cancel
OK
Set Rating Level
4. PG 13
OK
5. PG R
New
4. PG 13
New password OK
New Password
New password
* * * *
OK
Confirm password
Cancel
Digital Audio
Format
DVD System Menu Options
(underlined options are the factory default settings)
7. NC 17
{ }
8. Adult
{ }
DVDs that are rated higher than the level you have selected will not play
unless you enter your four-digit pin code.
Helpful hints:
– VCD, SVCD, CDs have no level indication, so parental control has no effect
on these type of discs. This also applies to most illegal DVDs.
– Some DVDs are not coded with a rating though the movie rating may be
printed on the disc cover. The rating level feature does not prohibit play of
such discs.
To change your password
1) Parental Rating Level
Select {
You will be prompted to enter your four-digit pin code.
2) numeric keypad 0-9
Use the
and select
OK
to confi rm.
The set rating level menu appears.
3)
Select in the menu and press OK to access new password
New
menu.
4) numeric keypad 0-9
Use the
code, then press
pin code a second time.
5)
Select in the menu and press
OK
To abort the change, select
OK
Adjust the digital output setting only if you have connected other
devices to the coaxial socket on the recorder.
1)
Use keys to select one of the options.
All
{ }
LPCM
{ }
2)
Press OK to confi rm your selection.
– No children under age 17; not recommended
viewing for children under age 17.
– Mature material; should be viewed only by
adults due to graphic sexual material, violence or
language.
} and press
to enter your four-digit pin code
OK
in the menu and press
to enter your new four-digit pin
to select the next entry fi eld and enter the same
OK
to confi rm.
and press
CANCEL
– Select this if you have used the COAXIAL
socket on the recorder to connect to a stereo
receiver that has a built-in multichannel decoder.
– Select this if the connected audio equipment is
not capable of decoding multichannel audio
Dolby Digital and MPEG-2 multichannel signals
are converted to PCM (Pulse Code Modulation).
(continued)
OK
.
on the remote control
OK
.
51