Basic Connections - Dvd Recorder; Step : Connecting The Video Cable; Option 1: Using Video(Cvbs) Jack; Option : Using S-Video Jack - Philips DVDR3345 User Manaul

Basic Connections - DVD recorder

Option 3
Step 2: Connecting the
video cable
This connection enables you to view the
disc playback from the DVD recorder.
You only need to choose one of the
options below to make your video
connection.

Option 1: Using Video(CVBS) jack

(good picture quality)
l
Use the supplied audio/video cables (yellow
plug) to connect VIDEO (CVBS)-OUT
jack on the DVD recorder to the video
input jack (or labeled as A/V In, Video In or
Composite) on the TV.
Option 2: Using S-Video jack
(excellent picture quality)
l
Use an S-video cable (not supplied) to
connect S-VIDEO jack on the
DVD recorder to the S-Video input
jack (or labeled as Y/C or S-VHS) on
the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Option 1
Option 
Option 3 : Using Component Video
jack (best picture quality)
Use the component video cables (red/
A
blue/green - not supplied) to connect the
Y Pb Pr -OUT jacks on the DVD
recorder to the corresponding
component video input jacks (or labeled
as Y Pb/Cb Pr/Cr or YUV(Y/Pb/Pr)) on
the TV.
If your TV accepts Progressive Scan signal,
B
see page 49 for detailed Progressive Scan
set up.
IMPORTANT!
The progressive scan video quality is
only available through Y Pb Pr
connection and a progressive TV is
required. It is strongly advised to
complete the DVD recorder
installation first, before enabling the
progressive scan feature.
(continued)
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
11