Connecting The Audio Cables - Philips DVDR3380 User Manual

Step 1: Basic Recorder Connections
EXT 2
TV-OUT ANTENNA-IN
STEREO / TV

Connecting the audio cables

This connection enables you to listen to
the sound. This connection is not
required if the recorder is connected to
the TV using the SCART cable.
Option 1: Using an audio cable
You can connect the recorder to a
two channel stereo system or receiver in
order to enjoy the stereo sound system.
Use an audio cable (red/white ends) to
connect the AUDIO-L/-R sockets to
one of the following devices with the
same input sockets.
– a stereo system (for example, TV or
mini system).
– a receiver with two channel analogue
stereo.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
EXT 1 TO TV - I/O
AUX - I/O
Option 1
(continued)
COAXIAL
Option 2
DIGITAL IN
AV amplifi er/
receiver
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver with a digital
multichannel sound decoder in order to
enjoy multichannel surround sound.
Use a coaxial cable (not supplied).
Connect the COAXIAL (DIGITAL
AUDIO OUT) socket on the recorder
to the digital input of the receiver/
amplifi er.
Before you start operating, set the digital
audio output settings accordingly (see the
chapter "DVD System Menu Options -
PLAYBACK settings). If the audio setting
does not match your stereo's capabilities,
the stereo may produce a strong,
distorted sound or no sound at all.
~
MAINS