Zoom G5n Operation Manual page 27

Changing various settings
• On the SYSTEM screen, turn
• Press
• Turn to set AUTO SAVE to ON/OFF .
NOTE
When set to OFF , no patch or effect parameters will be saved automatically.
• Press
Note about switching patches
When AUTO SAVE is set to OFF , if you try to switch patches after changing any parameters, a
message will appear asking to save the parameter changes.
To save changes to parameters before switching patches, select YES. ( P21)
To discard changes to parameters before switching patches, select NO.
.
to confirm the auto save setting.
to select AUTO SAVE.
28